Installation
NOTE : Please make sure to unplug power before connect any cable to this unit.
1. Place this unit on a flat, stable surface. Avoid locations that are subject to direct
sunlight, excessive heat, moisture, or dust.
2. Connect the cables that come from cameras to VIDEO IN ports, the input
impedance of these ports are 75 ohms.
3. Connect VCR IN/ OUT to VCR OUT/IN of VCR to record the picture.
4. Connect MONITOR OUT to VIDEO IN of monitor.
5. Connect ALARM to other equipment by 9 pins D-SUB connecter. Definition of
this port will be described in page 12.
6. After user complete all the connection, plug the adaptor in.
ONE VCR SETUP FOR MONELS
2-CH
3-CH
4-CH
MONITOR
VCR OUT
ALARM
DC IN
VIDEO IN
VCR
ALARM SENSOR
MONITOR
VCR IN
PLAY BACK MODELOS
2-CH
3-CH
4-CH
MONITOR
VCR OUT
ALARM
DC IN
VIDEO IN
VCR
ALARM SENSOR
MONITOR
VCR IN
6
5
