a. Simultaneously press PS4
button / X1
button / NS Pro
PS4
button / X1
button / NS Pro
button and release to enter vibration
configuration mode
b. Click the
s to improve the vibration intensity
c. Click the
, reduce the vibration intensity (to a minimum, turn off the vibration)
d. Press the PS4
button / X1
button / NS Pro
button to exit the configuration mode
DS3 handle can not adjust the vibration intensity, only the switch function
F
、
Four sets of independent configuration switching
The V5.0 firmware can save 4 sets of configurations at the same time, and the first set of
configurations is loaded by default when booting. The configurations between the groups
do not interfere with each other and can be quickly switched using PS4
button /
X1
button / NS Pro
PS4
button / X1
button / NS Pro
button
or PS4
button / X1
button / NS Pro
PS4
button / X1
button /
NS Pro
button. LEDs (red, green, blue, yellow) and vibration prompts when
switching.
Use scenarios such as:
a. the first set of configuration features default, only use the handle conversion function.
b. the second group for the jet fighter 2, opened the burst function, open a one-button big
move function.
c. the third group for the blade of the different degrees 2, open one-click continuous
strokes and button locks, used to brush reputation, etc.
d. other games
G
、
Calibration function
The calibration function can solve the problem of rocker drift on part of the handles without
increasing the dead zone.
1.Calibration:
a. Press the PS4
button / X1
button / NS Pro
PS4
button /
X1
button / NS Pro
button at the same time and release to enter the calibration