Deluxe Wood Effect LED Floor Lamp
J031 WO
Instructions for Use
Please read and retain these instructions for future reference
v003: 06/03/21
Before you begin:
Inspect lamp before assembly. Some wire
connections have been made at the factory and
the lamp is ready for assembly.
Remove all packing materials from the lamp.
To prevent bad connections, avoid pulling wiring
connections when removing contents from
package or during installation.
Lay out all the parts on a flat surface.
Assembly Instructions:
To prevent damage to the pole, please follow the
steps below:
1.
Take the FLEX POLE and feed the POWER CORD
through the UPPER POLE.
2.
Screw the UPPER POLE clockwise into the FLEX
POLE. (Be careful not to pinch the wires.)
3.
Feed the POWER CORD through the MIDDLE
POLE and screw MIDDLE POLE clockwise into the
UPPER POLE. (Be careful not to pinch the wires.)
4.
Feed the POWER CORD through the LOWER
POLE and screw LOWER POLE clockwise into the
MIDDLE POLE. (Be careful not to pinch the
wires.)
5.
Connect the two ends of the POWER CORD by
pressing the LOCK CONNECTORS into place.
6.
Carefully feed the excess POWER CORD into the
LOWER POLE. (DO NOT CUT OR SHORTEN THE
POWER CORD).
7.
Turn and tighten the metal connecting COLLAR
onto the base.
8.
Take out the screw and insert the LOWER POLE
into the COLLAR.
9.
Check direction of the lamp and line up the
screw holes and use a screwdriver to tighten the
screw.
Flex Pole
Power Button
Upper Pole
Power Cord
Middle Pole
Lower Pole
Lock Connectors
Collar
Base
Adapter
