Metal Garden Bench
G366
Instructions for Use
Please read and retain these instructions for future reference
v001: 21/10/19
Step 2
Fit 5 slats across using 5x bolts and
5x washers on both sides as shown.
Ensure the rear legs of the bench are
at a 90 degree angle. Do not tighten
bolts fully.
Step 3
Turn bench upside down and use
screws to fasten the strap vertically
across the slats and attach the
stabilisers. Use 2x screws on the
wooden slats and 2x short bolt and
washer on the metal.
Go around and fasten all bolts and
screws.
Maintenance
Periodically check all screws and bolts for tightness.
Cover or protect from adverse weather.
DISPOSAL
•
Dispose of all packaging, paper, cartons, plastic and plastic bags in accordance with your local recycling
regulations.
•
At the end of the product’s lifespan please dispose of it at an authorised household waste recycling
centre.
