Total Body Exerciser Cycle
8829
Instructions for Use
Please read and retain these instructions for future reference
v002: 13/03/17
Push the second
pedal onto the steel
rod and tighten bolt
with the Allen key.
Repeat steps A to E to
assemble the
handlebar pedals.
Assemble the lower
upright tube to the
base unit using the
locking nuts and bolts
supplied.
Put the upper into the
lower tube, and slot
black plastic sleeve
on. Adjust to correct
height and tighten
screw before use.
Turn tension knob to
adjust the resistance
of the pedals for easy
or harder pedalling.
WARNING:
Do not over tighten the tension knob. Do not use tools to tighten. Damage may occur to the bearing case if
over tightened.
Surface around the tension knob and crank bearings may get hot if used continuously for 20 mins. Please
stop and allow to cool before re-use.
CAUTION:
Please remember the Exerciser is for use when sitting.
Do not stand or place your weight over the top portion of the Exerciser.
Always use the foot straps when pedalling.
Maximum pedal force of 80Kg
Warning! Surface around the tension knob and crank bearings may get hot if used continuously for 20 mins.
Please stop and allow to cool before re-use.
DISPOSAL:
•
Dispose of all packaging, paper, cartons and plastic, plastic bags in accordance with your local recycling
regulations.
•
At the end of the product’s lifespan please dispose of it at an authorised household waste recycling centre.
