1. Safety information
Please refer to these instructions for the safety information.
CAUTION
Read all the safety regulations and instructions.
Any errors made in following the safety regulations and
instructions may result in an electric shock, fire and/or
serious injury.
Keep all safety information and instructions in a safe
place for future use.
This equipment is not designed to be used by people
(including children) with limited physical, sensory or
mental capacities or those with no experience and/or
knowledge unless they are supervised by a person
who is responsible for their safety or they have received
instructions from such a person in how to
use the equipment safely. Children must always be
supervised in order to ensure that they do not play
with the equipment.
Explanation of the warning signs on the equipment
(see Fig. 8)
1. Important.
2. Read the directions for use before operating the tool.
3. Wear goggles and ear protectors and protective footwear.
4. Do not use the tool in rain or snow. Do not expose the
tool to wet conditions.
5. Keep all other persons away from the danger zone.
6. Beware of catapulted objects.
7. Switch off the tool and pull out the power plug before
carrying out any cleaning or maintenance work.
8. Rotating parts. Keep your hands and feet away from the
brush.
2. Layout
(see Fig. 1)
1. Cable strain-relief clamp
2. ON/OFF switch
3. Guard hood
4. Guide wheel
5. Additional handle
6. Safety lock-off
7. Rear handle
3. Items supplied
• Open the packaging and take out the equipment with
care.
• Remove the packaging material and any packaging and/or
transportation braces (if used).
• Check to see if all items are supplied.
• Inspect the equipment and accessories for transport
damage.
• If possible, please keep the packaging until the end of the
guarantee period.
IMPORTANT
The equipment and packaging material are not toys.
Do not let children play with plastic bags, foils or small
parts. There is a danger of swallowing or suffocating!
• Guard hood (3)
• Guide wheel (4)
• Wire brush (8)
• Nylon brush (9)
• 4 x screw 3.5x13 (10)
• Nut M8 (11)
• 1x open-ended wrench (12)
• 1x bolt (13)
• Main housing (14)
• Original operating instructions
• Safety information
4. Intended use
The equipment is designed to remove weeds from between
paving stones and slabs. It is not intended
for use on sensitive surfaces like tiles. Do not use on loose
surfaces such as gravel or stones or soil.
The equipment is to be used only for its prescribed purpose.
Any other use is deemed to be a case of misuse. The
user/operator and not the manufacturer will be liable for any
damage or injuries of any kind caused as a result of this.
Please note that our equipment has not been designed for
use in commercial, trade or industrial applications. Our
warranty will be voided if the equipment is used in
commercial, trade or industrial businesses or for equivalent
purposes.
5. Technical data
Mains voltage: 230-240v~ 50 Hz
Power input: 140W
Idling speed: 1200min
-1
Max. brush diameter 100mm
Protection class: II /
Weight: 2.37kg
Sound and vibration
Sound and vibration values were measured in accordance
with EN 60745.
Sound pressure level LpA 68 dB(A)
Uncertainty KpA 3 dB
Schallleistungspegel LWA 88 dB(A)
Unsicherheit KWA 3 dB
Wear ear protectors
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with EN 60745.
Surface grinding
Vibration emission value ah
≤
2.5 m/s
2
K uncertainty = 1.5 m/s
2
Additional information for electric power tools
Warning!
The specified vibration value was established in accordance
with a standardized testing method. It may change
according to how the electric equipment
is used and may exceed the specified value in exceptional
circumstances.
