Electric Knife Sharpener
10445
Instructions for Use
Please read and retain these instructions for future reference
v002
:04/10/17
Do not place on or near heat sources, and use the Electric Knife Sharpener on a level, stable
surface.
NEVER cover the item in any way when in use,
Do NOT place under or near flammable materials such as curtains, draperies, shelves, loose
wall paper etc.
Do not use this appliance for any other use than the intended use it is designed for.
Ensure there is sufficient distance between the Electric Knife Sharpener and other items on
the work surface or work station, or sufficient distance between the Electric Knife Sharpener
and the confines of the area in which it is situated. We recommend a minimum clearance
around all faces of at least 10cm.
Before use, check thoroughly for any defects and do NOT use if defects are found. Take care
not to drop the appliance as heavy impacts may cause internal damage.
WARNING:
•
Check the appliance and power cable carefully for damage before each use.
•
Keep the appliance away from children.
•
Before connecting the appliance, check if the voltage indicated on the bottom of the
appliance is in accordance with the mains voltage in your home.
•
This appliance is for adult use.
•
This appliance may be used by persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge, if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards involved.
•
Children shall not play with the appliance.
•
Cleaning and user maintenance shall be conducted by adults.
•
Do not use if the power cord or plug is damaged. Item should be repaired by a qualified
electrician or replaced by the manufacturer, service agent or similarly qualified person, in
order to avoid a hazard.
PLUG WIRING (UK & IRELAND)
This appliance is fitted with a BS 1363 fused plug. If you have to replace the fuse, only those that are
ASTA or BSI approved to BS 1362 of the same rated current should be used.
If there is a fuse cover fitted, this cover must be re-fitted after changing the fuse. If the fuse cover is
lost or damaged the plug must not be used. Spare fuse holders and fuses are available from
electrical outlets.
If the socket outlets in your home or office are not suitable for the plug of this product, the plug
must be removed and disposed of safely as insertion of the plug into a socket is likely to cause
electric hazard. A replacement plug should be wired according to the following instructions:
The cable
A mains electricity cable contains two or three inner wires. Each has a core of copper and an outer
layer of flexible plastic. This product is double insulated; the wires in the cord set are colour coded in
the following way:
BLUE
NEUTRAL
BROWN
LIVE
