6.5Ft Inflatable Santa with Sleigh
K765
Instructions for Use
Please read and retain these instructions for future reference
v002: 28/06/22
When using electrical products, basic precautions should always be practiced including the following:
1.
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
2.
Read and follow all instructions that are on the product or provided with the product.
3.
For a cord-connected or direct plug-in power unit, do not use an extension cord.
4.
Installation work and electrical wiring must be done by qualified person(s) in accordance with all
applicable codes and standards, including fire-rated construction.
5.
For a cord-connected or direct plug-in power unit, do not install or use within 10 feet of a pool.
6.
For a cord-connected or direct plug-in unit, do not use in a bathroom.
SAVE THESE INSTRUCTIONS - This manual contains important safety and operating instructions for power
units.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
Parts Identification
Check to ensure all parts listed are included in the product packaging.
•
Inflatable Figure
•
BS Approved Adaptor
•
Stakes
•
Ropes
To Set Up and Use
1.
Remove contents from packaging.
2.
Plug adaptor into connection at base of Inflatable. Plug adaptor plug into standard wall outlet.
3.
Blower will immediately begin to start the flow of air.
4.
Zip zipper at base of blower. Inflatable will then fully inflate.
5.
To secure the Inflatable Figure to the ground, insert a plastic Stake into the ground through each of
the holes in the lower tabs of the Inflatable Figure. To easily insert stakes into the ground, it is
recommended to wet the ground first. To avoid damaging garden stakes when inserting into the
ground, select a spot in soft, rock-free soil. Insert the base of the stake first then gently insert the
rest of the stake into the base.
6.
To deflate, unplug blower. For faster deflation, unzip zipper after unplugging blower.
Care and Maintenance
•
Periodically check to ensure there are no ruptures or tears in the Inflatable Figure. If you find any
tears in the fabric, you can repair them with needle and regular thread. No special thread is
necessary.
•
Always maintain the air vent of the Motor Base unobstructed and free from dirt and/or debris.
•
Periodically unplug the product from the electrical outlet and allow the Motor to cool to avoid
overheating and/or product damage.
•
Neatly fold and store the product in a cool, dry location that is away from sunlight or heat sources.