Glass Shade Clock Touch Lamp
H811
Instructions for Use
Please read and retain these instructions for future reference
v001: 21/06/21
CARE AND CLEANING INSTRUCTIONS:
•
Do NOT use abrasive cleaners or sharp utensils to clean this appliance.
•
Store the item in a cool, dry place.
•
To avoid electric shock never dismantle the touch control or try to insert objects into it.
•
Avoid direct contact of the lamp with water.
•
Always carry the lamp by holding the stand and never by holding the shade.
•
Before replacing a defective bulb unplug the lamp and let it cool down for at least 10 minutes.
•
Only change the bulb if it has completely cooled down. Use a clean fluff-free cloth to change the bulb.
•
If necessary, the lamp can be cleaned with a clean dry or slightly damp cloth. Do not immerse in water.
•
Caution: please unplug it at least 10 minutes before cleaning.
•
The lamp is designed for indoor use only.
•
If the external flexible cable or cord of this luminaire is damaged, it must be exclusively replaced by a
qualified technician.
BATTERIES
•
Keep batteries away from children and pets.
•
Do not mix used and new batteries.
•
Remove the batteries if left for long periods.
•
Never dispose of batteries in a fire.
•
Battery disposal, spent or expired batteries must be properly disposed of and recycled in compliance
with local regulations. For detailed information, contact your local authority.
Assembly of the lamp
Caution: Be sure that the electricity is turned off before
proceeding with the assembly.
1.
Screw the bulb (Max 40W E14 bulb, not included)
into the lamp holder.
2.
Screw the metal spacer into the holder.
3.
Put the glass into the frame and fix it with the
screws.
4.
Attach the cover on the top of the glass shade and
put in the screws to fix it again.
5.
Put the screws into the cover.
6.
Connect the plug with the main supply. This touch
lamp comes with an easy 4-way touch control.
Simply touch the lamp metal parts to switch
between high-medium-low and off settings.
7.
Insert the battery into the clock box
⑧
(required
1xAA battery
–
not included).
8.
Set the correct time at the dial at the back of the
clock.
