Oscillating Tower Heater
H765
Instructions for Use
Please read and retain these instructions for future reference
v001: 19/03/21
This function will work in any mode. The timer function allows you to set the length of operation from 1 to 8
hours.
To set the timer, press the TIMER button. The LED display will show 1 h for 5 second, then display room
temperature., indicating the heater will operate for 1 hour before shutting down to standby. To increase the
operation time, continue to press the timer button until the desired operation time is displayed. To cancel
the timer feature press the timer button until all time indicator light off. This returns the heater to
continuous running. Each press increases the timer by 1 hour.
TEMPERATURE SETTING:
1)
Operate the Heating Mode as per above instructions.
2)
The LED screen will display the room temperature, to adjust the temperature, press “+”
to increase the desired temperature and “
-
“ to decrease the desired temperature.
3)
When the set temperature reaches same or below the air temperature, the heater will cut off. The
heater stops working but the fan continues working to allow the product to cool down and maintain
the temperature.
4)
When the set temperature reaches 2 degrees above the air temperature, the unit will turn to low
heat 1200W,above 4
℃
will turn to high heat 2400W.
5)
Temperature can be set from 10 degrees to 49 degrees, by pressing the “+” and “
-
“.
