Open Toe Foot Heat Massager
G609
Instructions for Use
Please read and retain these instructions for future reference
v001: 23/03/20
DO NOT
COVER THE ITEM IN ANY WAY WHEN IN USE AS THIS MAY CAUSE OVERHEATING.
DO NOT USE THIS APPLIANCE FOR ANY OTHER USE THAN THE INTENDED USE IT IS DESIGNED FOR.
ENSURE THERE IS SUFFICIENT DISTANCE BETWEEN THIS APPLAINCE
AND OTHER ITEMS ON THE WORK
SURFACE OR WORK STATION, OR SUFFICIENT DISTANCE BETWEEN THE APPLIANCE AND THE CONFINES
OF THE AREA IN WHICH IT IS SITUATED. WE RECOMMEND A MINIMUM CLEARANCE AROUND ALL FACES
OF AT LEAST 10CM.
BEFORE USE, CHECK THOROUGHLY FOR ANY DEFECTS AND DO NOT USE IF DEFECTS ARE FOUND. TAKE
CARE NOT TO DROP THE APPLIANCE AS HEAVY IMPACTS MAY CAUSE INTERNAL DAMAGE.
Parts
How to operate
1.
(Power ON/OFF): Press this button to switch power-on. All keys are operational. The automatic setting
time is 15 mins. The Acupuncture and Air Pressure function turn on when power on, and the air-pressure
of the feet is opened by default in low intensity, acupuncture & kneading speed default in low intensity.
Acupuncture & kneading speed defaults to slow speed. Press this button again, the whole machine is
shut down, and all massages are stopped and the system is in standby mode. After 15 minutes the
massager stops massaging and enters standby state.
2.
Speed: The default settings is slow speed when powered on, press the button to adjust the speed as you
required. The speed switches every time you press the button, shown by 2 LED indicator lights,
respectively indicating slow and fast speed.
3.
Heating: The heating function will be started once the device is turned on (default mode). Press the
heating button to turn off and press again to turn on.
4.
Air pressure: The default is weak intensity on power-on state. Press the button to increase intensity level
to medium, the corresponding light will turn on.
