Log Solar Water Fountain
G356
Instructions for Use
Please read and retain these instructions for future reference
v002: 11/05/20
ALWAYS POSITION IN DIRECT SUNLIGHT FOR BEST CHARGING
Dimensions:
25cm x24cm x40cm
LED lights are not replaceable
SPECIFICATION
：
● The Battery
：
NI-MH 7.4V/1500MA
● The Size of Solar Battery
：
175 MM
ⅹ
140MM
● The Power of Pump
：
DC4.5-12V
，
0.5-5W
● Max Flow Quantity of Pump
：
180-200L/H
● Max Water Height of Pump
：
80-90cm
Installation instructions:
1.
Attach the pump to the solar panel before use, plug the sprinkler head or hose into the outlet of the
pump. Make sure the water level covers the pump, but is lower than the sprinkler head.
2.
Plug the power line of the pump into the plug of the solar panel, and then fasten.
3.
Position the solar panel in full sun to optimally run the pump, the backup battery will be charged from
the solar panel during normal operation and automatically run the pump without sunshine.
4.
If required the pump can be run by the battery in times of low sunlight. Turn on the switch at located at
the back of the solar panel. If the battery is fully charged the pump will start to work immediately.
5.
If the switch is turned off,the pump will be operated by the solar panel only.
•
LAY BACK AND RELAX WHILST LISTENING TO THE
SOOTHING SOUND OF RUNNING WATER
•
SOLAR POWERED FOUNTAIN
•
THE WATER TRICKLES DOWN FROM EACH TIER OF THE
FOUNTAIN CREATING A WONDERFUL SOOTHING
SOUND AND THEN RECYCLES BACK INTO THE
FOUNTAIN AGAIN
•
SIMPLY PLACE THE FOUNTAIN IN A WELL LIT AREA OF
YOUR GARDEN AND ENJOY
•
MADE FROM WEATHER RESISTANT POLYRESIN
