Skirting Board Heater F994 Instructions for Use
Please read and retain these instructions for future reference v001: 04/03/19
must be removed and disposed of safely. Attempts to insert the plug into the wrong socket is likely
to cause electric hazard. A replacement plug should be wired according to the following
instructions:
The cable
A mains electricity cable contains two or three inner wires. Each has a core of copper and an outer
layer of flexible plastic. This product is earthed; the wires in the plug are colour coded in the
following way:
BLUE
NEUTRAL
BROWN
LIVE
GREEN & YELLOW
EARTH
The diagram below shows the key features of a correctly wired three-pin mains plug.
MAINTENANCE
1.
Turn off the power switch in the rear of the unit.
2.
Unplug the unit and let it cool completely.
3.
To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may
use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth. CAUTION: DO
NOT let liquid enter the heater.
4.
DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean
the heater. This may cause damage or deterioration to the surface of the heater.
5.
DO NOT immerse the heater in water.
6.
Wait until the unit is completely dry before use.
STORAGE
Store the heater in a cool, dry location when not in use. To prevent dust and dirt build-up,
use the original packaging to repack the unit.
TROUBLESHOOTING
If the heater will not operate, please check the following before seeking repair of service:
Check if the power cord is plugged into an electrical outlet, if not, plug in.
Check if electricity to the main fuse is working.
CARE AND CLEANING INSTRUCTIONS