Petrol Tiller Rotavator
10598
Instructions for Use
Please read and retain these instructions for future reference
v003:8/11/17
1.
Place the mid-handle frame onto the lower handle frame so
that it bends in the direction of the user.
2.
Ensure that the holes in the bars of both handle frames are
in alignment. Using two of the handle lock knob and bolt
sets, fix both handle frames together. The knobs should be
positioned on the inside of the frame. Tighten them securely.
3.
Attach the left and right handles to the mid-handle frame
with the remaining two handle lock knobs.
4.
The cross bar acts as an additional support to the handle
frame assembly. Insert each threaded end of the crossbar
through the matching holes in the right and left handles. If
fitting the cross bar is too difficult, loosen one of the upper
handle lock knobs slightly.
5.
Cap the threaded ends of the cross bar with the spring
washers and nuts supplied. Ensure all handle lock knobs are
tightened securely.