Cooper Wheelock SAFEPATH SPB-160, Installation, Testing, Operation And Maintenance Manual, Page: 23 / 86

Series SPB Audio Boosters Manual, Revision A
4-1
4 Installation
4.1 Introduction
Remember the lives of people depend upon the safe and proper installation of the voice
evacuation system and the Series SPB Audio Booster Panel. Please read, understand, and follow
the specific installation instructions set forth in this chapter carefully to avoid damage to the panel
and equipment connected to it. Ensure that only qualified personnel in accordance with the
procedures in this manual conduct the installation.
WARNING: Shut off all power before starting the installation.
Electrical shock can cause death or serious injury.
WARNING: Do not connect AC power or battery backup power
until system wiring has been connected, modules have been installed,
and field wiring has been inspected.
CAUTION: The printed circuit board is sensitive to static electricity and has
delicate components mounted on it. Before handling the board or any
component on it, discharge any static electricity from your body by touching a
grounded object such as a metal screw, which is connected to earth ground.
Install the panel in a static-free area; properly attach grounded wrist straps
before touching any static-sensitive areas.
If you or the installer have any questions about the installation, consult with should consult with
the authorities having jurisdiction (AHJ), prior to installation.