113904 – System Users Manual
12
Table 5.4 Program Functions
Parameter
Format
Factory Default
Date
MM/DD/YY (Month, Date, Year)
Current Date
Time
HH/MM (Hours, Minutes)
Eastern Stand Time
Monthly Test Date
DD (Date)
15
th
of the Month
Monthly Test Time
HH/MM (Hours, Minutes)
5:00
Yearly Test Date
MM (Month)
01
Yearly Test Time
HH/MM (Hours, Minutes)
8:00
Load Reduction
AAAA(Amps)
0.0A
Low VAC Alarm
VVVV(Volts)
1.0V
High VAC Alarm
VVVV(Volts)
999.9V
Ambient Temp Alarm DDD(Degrees Centigrade)
70°C
Near Low Battery
VVVV(Volts)
43VDC
•
Near Low Battery Voltage is in VVVV (Volts). The last digit entered is after the decimal
place. I.E. (430 + ENTER) will register 43.0VDC.
•
Load Reduction Fault is in AAAA (Amps). The last digit entered is after the decimal place.
I.E. (480 + ENTER) will register 48.0 Amps. If the output current under battery power is 1
0 percent below this number, the alarm will be set.
•
Low AC Voltage Alarm is in VVVV (Volts). The last digit entered is after the decimal
place. I.E. (1200 + ENTER) will register 120.0 Volts. If the Input AC Voltage goes below
this number the alarm will be set.
•
High AC Voltage Alarm is similar to Low AC Voltage Alarm.
•
Ambient Temperature Alarm is in DDD (Degrees Centigrade). I.E. (75 + ENTER) will
register 75 deg. C. When the ambient temperature internal to the inverter enclosure goes
above the set point the alarm will be set.