HALO
®
1
Remove connector cover from connector.
2
Insert end of wireway channel into connector and tighten
connector mounting philips screw and tighten allen screws
securely to bus bars.
3
Attach 1/2" trade size fitting (supplied by others) to channel
connector using speed nut. The speednut provided with LV211
must be used for surface feed.
4
Insert supply wire from transformer secondary as shown and
tighten allen screws securely. Refer to power supply instructions
for recommended supply wire sizes.
5
Reinstall connector cover.
701934
Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • 770.486.4800 • FAX 770.486.4801
Connector Mounting
Philips Screw
Speed Nut
Buss Bar Allen Screws
1/2" Trade Size Connector
(supplied by others)
Buss Bars
Feed Allen Screws
Cover
Wireway Channel
Connector Mounting
Philips Screw
Cover Screw
Speed Nut
Buss Bar Allen Screws
1/2" Trade Size
Connector
(supplied by
others)
Buss Bars
LV211 Feed
Feeding Wireway Channel with LV211 End feed.
LV211 Feed
2
Cover
Wireway Channel
Connector Mounting Philips Screw
Cover Screw
Speed Nut
Buss Bar Allen Screw
Buss Bar Allen Screw
1/2" Trade Size
Connector
(supplied by
others)
Buss Bars
LV211 Surface Feed
