- Fe Benefits
P R O D U C T S P E C I F I C A T I O N S
15
E N T R I S e r i e s
A r c h i t e c t u r a l W a l l L u m i n a i r e
O P T I C A L S Y S T E M S
Choice of ten (10) high efficiency optical systems constructed of premium 95% reflective
anodized aluminum sheet, or bright specular anodized polished spun aluminum. Available
distributions include Type III, Type III with 10% secondary glow, Type III with 4˚ pencil
secondary, Forward Throw, Forward Throw with 10% secondary glow, Forward Throw with
4˚ pencil secondary, FX grazing optic, FXF 50% up/50% down grazing optic, Tight Spot,
and 50% up/50% down Tight Spot. Optical segments are rigidly mounted inside a heavy
wall aluminum housing for superior protection. All segment faces are clean of rivet heads,
tabs, or other means of attachment which may cause streaking in the light distribution.
All reflector modules feature quick disconnect wiring plugs. T6 Metal Halide lamps feature
G12 lampholders, White Son
TM
High Pressure Sodium lamp features a GX12 lampholder,
Quartz Halogen lamps feature mini-can screw based lampholders, and Compact Fluorescent lamps
feature GX24q-(3,4,5) 4-pin lampholders.
M O U N T I N G
Standard zinc plated attachment plate mounts directly to 4" J-Box. Fixture slides over mounting plate and is
secured with two (2) concealed stainless steel fasteners. Mounting plate features one-piece, EPDM gaskets on
either side of plate to firmly seal fixture to wall surface, forbidding entry of moisture and particulates. Optional
mounting arrangements utilize a die-cast aluminum adapter box to allow for surface conduit wiring, quartz lamp
options, and emergency battery pack capability.
H O U S I N G
One piece die-cast aluminum construction for precise tolerance control and repeatability in manufacturing.
Accommodates either up or down mounting configurations with no modifications. Downlight and uplight lens’
are impact resistant 5/32" thick tempered clear or frosted flat glass, sealed to the housing with high strength
VHB adhesive tape and a continuous silicone bead gasket. Silicone wireway plug on housing back wall seals
incoming electrical leads to prevent moisture or dust entry.
F A C E P L A T E
One piece die-cast aluminum faceplate utilizes a continuous silicone gasket to seal
securely to housing. Side hinged faceplate swings open via release of one (1)
flush mount die-cast aluminum latch on housing side panel. Available luminous glass
insert is .16" thick frosted glass, secured to back of faceplate with a continuous EPDM
gasket. Available colored gel film secures behind glass.
