8
Transmitter Setup
Once the pH Electrode has been mounted and configured, the reset button on the
Analog Transmitter must be pressed to initiate sending the newly configured pH values.
900Mhz Digital Analog Transmitter
1. Remove the Transmitter cover.
2. Verify that the
Transmitter is wired (D)
for 4-20mA input.
3. Verify that the
Transmitter Jumper (C)
is configured for 4-20mA input.
4. Insert the battery(s) into the
Battery Slot
(A)
.
5. Press the
Reset Button
(B)
to initialize the Transmitter.
6. Install the Transmitter cover.
D
C
Summary of Contents for EnviroTrak Sensorex TX100
Page 2: ...2 ...
Page 11: ...11 NOTES ...
