Point the controller perpendicularly to
the receiver on indoor unit when
transmitting signals, and the signal
icon will keep flashing.
Signal transmission indication
Display screen
Display setting temperature, operating
time, position of louver, operation
mode and air volume type, etc.
All the icons are displayed here for
reference, the display will be different in
practice.
Button Description:
□
Point signal transmitter on controller to the receiver on
indoor unit.
□
□
When transmitting signals, the controller should be in a cone
range of 120 degree based on the receiver plane. When
indoor unit is mounted at a low elevation, the reception angle
becomes larger and transmission distance gets shorter,
which varies depending on the building structure.
□
As battery is exhausting, signal transmission distance will get
shorter, and might get failed to control / . n such case,
replace the batteries in time.
Operation of sending signals should be close to the indoor unit,
and make the controller perpendicular to the plane where the
receiver is located. If the plane is not perpendicular or
fluorescent light is used at this moment, the transmission
distance will be shorter.
Health
ON/OFF
Temp "+"
Temp "-"
Mode
Fan
ECO
Louver
Sleep
Boost
Electric heater
Quiet
Light
Timer
3D/Ultra
Signal
transmission part
. i na rans ission
2
