Buttons and Funcitons
04
SHORTCUT
SLEEP
FAN SPEED
Saves energy during sleeping
hours.
Used to restore the current
settings or resume previous
settings.
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote
control. The following is a brief introduction to the remote control itself. For instructions on how to
operate your air conditioner, refer to the
How to Use Basic Functions
section of this manual.
ON/OFF
SET
Turns the unit on or off.
MODE
OK
LED
Scrolls through operation modes
as follows:
NOTE:
Please do not select
HEAT mode if the machine you
purchased is cooling only type.
Heat mode is not supported by the
cooling only appliance.
AUTO
COOL
DRY
HEAT
FAN
TIMER ON
TIMER OFF
Increases temperate in
1°F (1°C) increments.
Max. temperature is
86°F (30°C).
TEMP
TEMP
Used to confirm the selected
functions
Decreases temperature
in 1
°F
(1
°C
) increments.
Min. temperature is
60
°F
(16
°C
).
Sets timer to turn unit off
(see How to Use Basic
Functions for instructions).
Turns indoor unit’s LED display and
air conditioner buzzer on and off
(model dependent), which create a
comfortable and quiet environment.
Scrolls through operation
functions as follows:
Fresh( )
I SENSE ( )
AP mode( ) Fresh...
The selected symbol will
flash on the display area,
press the OK button to
confirm.
Sets timer to turn unit
on (see How to Use Basic
Functions for instructions).
°C/°F
The temperature display
between the °C & °F.
ENERGY SAVER
Press this button to activate the
Energy saving mode. Press it
again to stop the funtion.
AUTO
LOW
MED HIGH
Selects fan speeds in
the following order:
