Cooper & Hunter COMFORT CH-F2000C, Instruction Manual

Page: 8 / 22

www.cooperandhunter.com
6
7. CLEANING AND MAINTENANCE INSTRUCTION
1. Light accumulated dust may be removed from the heater with a soft
cloth. Wipe the exterior surfaces of the heater occasionally with a cloth
moistened (not dripping wet) with a solution of mild detergent and water.
Dry the case thoroughly with a soft dry cloth before operating the heater.
2. The fan motor is lubricated by the factory, and will require no further
lubrication.
3. No other user maintenance is required orrecommended. If service is
required, send your heater to the nearest authorized servicedepot.
4. Store heater in a clean and dry place whennot in use.
There may be trace of smoke or odour when unit
is first operated. Do not be on the heating coil
during the manufacturing process. It will quickly
evaporate, and should not re-occur.
NOTE:
IMPORTANT!
Portable electric heaters are designed for spot
heating, or as a supplementary heat source. They
are not intended to be main sources of heat during
the normal heating season.
8. TROUBLESHOOTING
If the product does not operate or does not operate properly, first check
according to the following list. If the reason the product does not operate
or does not operate properly is not included in the following list, the
product mayhave failed. At this time, it is recommended to send the
product to the dealer or the Media Service Center for treatment.
.
The plug may not be
plugged well.
Check whether the plug is
properly inserted into the
receptacle.
The temperature control
knob is not turned in
place. Check whether the
temperature control knob
is turned to the ON
posi
ti on.
The machine suddenly
stops during hea
ti ng.
The temperature exceeds
the threshold of the
thermal cut-o
ff .
Cool the machine before
use.
Problem Possible Cause
Solu ti on
A ft
er the power is
engaged, the pilot
light does not
illuminate and the
machine doe s not
work
Table 2