Cooper & Hunter CH-D009WD8-20LD, User Manual

Page: 23 / 47

23
DRYING CLOTHES
Press the “dry clothes” button to increase the wind speed and enhance the hot air effect.
ANION
Press the “ANION” button to turn on the negative ion sterilization function.
WIND SPEED SETTING
Press the
“WIND SPEED SETTING”, both “high” and “low” can be selected.
Remarks:
In the dry clothes and energy-saving mode, the humidity and wind speed are automatically
controlled by the dehumidifier, and the manual adjustment of humidity and wind speed is
invalid.
4.2 INDICATOR LIGHTS
POWER ON/OFF
When the power cord is plugged in, the machine display shows the current ambient
humidity. Press the power button, the power indicator will light green, and the machine will
start running when the humidity is lower than the current ambient humidity.
WATER FULL
When the water tank is full, the full water indicator lights red, the compressor and the fan
stop working, and the buzzer sounds three times to remind the user to empty the water in
the water tank and ensure that the water tank is returned to its original position.
TIMING
When the timing is activated, the timing indicator will be green.
LOW WIND SPEED
When you set the wind speed to low, the low wind indicator will be green.
HIGH WIND SPEED
When you set the wind speed to high, the high wind indicator will show green.
DRYING CLOTHES
When the dehumidifier is set to the "dry" mode, the wind speed is set to high and runs in
continuous dehumidifiying mode, and the indicator light is green.