Cooper & Hunter CH-2945T, Instruction Manual

Page: 8 / 32

www.cooperandhunter.com
6
6. OPERATION OF THE UNIT
Instruction for first operation
Take out pearl cotton
1. Remove the mist outlet cover sub-assy and take out the buffer sub-
assy from the water tank and the power adaptor (see fig. 3).
2. Remove the mist outlet cover sub-assy and put it to one side; Fill the
water tank with water (see fig. 4), reinstall the water tank at the unit and
then close the mist outlet cover sub-assy. Please note that the triangular
mark faces forward (see fig. 5). When placing the water tank, please hold
it stably and install it correctly (water level should be lower than the
maximum water level line).
3. Connect the power adaptor with the unit jack, and then connect to the
power socket. After energization, it enters into the standby status.
4. Under the standby status, press “ ” button and the notch indicator
will be on. The complete unit starts working. The mist will come out from
the mist outlet of mist cover.
5) Please refer to “Button and Light” introduction for the detailed operation
of button and light indication.
6) If it needs to add the aromatherapy agent, press the fragrance box to
pop it. Drop some aromatherapy agent on the fragrance cotton and then
press the fragrance box to close it (see fig. 6).
Never add fragrance directly into the water tank or water
channel.
IMPORTANT!
Do not let aromatherapy agent contact the other parts
except the aromatherapy container for preventing damage.
If it has contacted other parts, please clean and wipe them
or eliminate them with dry cloth in time
IMPORTANT!
Fig. 3
Fig. 4
Fig. 5
Fig. 6