See Website for Full Safety Information
•
Do not use in confined space.
•
This unit requires 15V DC MAX
•
All Coomber equipment is covered by a 12 months warranty against
defective components or faulty manufacture from date of dispatch.
•
Any modifications to or misuse of the equipment renders this warranty void.
•
Equipment that is security marked or damaged cannot,
under any circumstances, be exchanged.
•
We reserve the right to change products and specifications without notice.
Power connection
………………………………………………….……
Product Instruction Manual
Connecting an iPod or External
audio device
Input Mix Levels
……….……………………..………...……………
•
Connect the
1858 15V
external power supply to the
DC in
.
WARNING
Please check that you have the correct 15V
power supply. Please check this very carefully a higher
power supply will damage this unit.
•
Plug the 1858 to the
mains
supply.
•
Switch on power to the unit. Press the on / off button.
The green LED will be lit when powered .
Playing a CD/USB/SD Card
…..…………………………………………………
…………………………………….…………………
•
Using the supplied (Coomber part no 41243) 3.5mm jack plug
lead connect the
headphone output
of the external device
(iPod) to the stereo
Aux in
.
•
Use the external device to play and adjust the volume after it
is plugged in.
•
You can use your Coomber to adjust the
volume
.
Remote control & menu features will not control your external
device.
Rechargeable Models
This unit contains rechargeable batteries
•
The
LED
lights up when the batteries are charging.
•
You can
charge and use
the unit at the same time, if the
DC power is unplugged the unit will continue playing.
Please fully charge the batteries before storage.
44500
Series
…………………………………………………….…
•
Each
input
has its own volume level, as a starting point set
all to
half volume
then adjust each one to your desired
volume.
•
E.g. CD volume slightly lower than Microphone so that
your voice can be heard over the music.
•
Then use the
master volume
to adjust the overall volume
to suit the space and audience.
UHF1 Models
A wireless microphone receiver is built
into this unit and preconfigured ready
for use. Please check the XLR lead is
plugged into the Mic 1 socket.
The microphone is set on channel 1
as a default.
•
To operate the microphone install a
new battery
then
adjust the
microphone level
and
master volume
on the
unit to mid point.
•
Switch on the microphone, adjust the
volume
to suit.
Bluetooth
•
Turn the unit on. Enable Bluetooth on your device–
iPod/
iPhone etc.
•
When discovered
Audio Device
will be displayed on your
device. Select
pair
or
connect
on your device.
•
An audio notification will be heard and also connected or
paired will be shown on your device.
•
You will be able to play music on your device and amplify it
with the Dance Combo.
•
Bluetooth range is generally low power Class2 10mtrs
without drop out.
•
NOTE
: If another device is already paired/connected you will not be able to
pair at the same time. You will need to switch the unit off and on then try
again or turn off the Bluetooth on the other device.
……….……..………………………………………
•
FEED a
CD
printed side up into the slot, the CD can be
CDA format or MP3.
•
EJECT
-
If pressed this will send the disc out.
•
SOURCE
-
When the Source key is pressed you can toggle
between the
CD, USB
and
SD CARD READER
.
•
FOLDER
-
When in
“
stop
“
mode, select the folder to be
played by scrolling through <<back or >> next folder.
When in the
“
play
”
mode, you can skip the track being played
to the next or previous track that is in the folders list by
pressing << or >>.
CAUTION
If no sound is heard;
•
Check the mute button on the CD, if playing from a CD/
USB/SD Card. Turn up the master volume & input volume to
the desired level.
