5
Electricity supply
Once a satisfactory location has been established, the electrical supply to the appliance must be arranged
beneath the work surface.
If an existing mains supply does not exist at the location, a mains wall outlet below the work surface, and a
suitably rated isolator switch should be installed above the work surface and to one side of the unit, in case
of an emergency (Figure 4). The isolator switch must have working contacts 3mm apart.
This installation must be carried out in accordance with current I.E.E. Wiring Regulations and Building
Regulations (Part P).
If in any doubt consult a qualified electrician
The mains voltage must correspond exactly to that which is specified on the data plate.
Figure 4 - isolator switch and wall outlet
ISOLATOR
SWITCH
WALL
OUTLET
WORKTOP
Installing the oven
Before installing the oven in its housing, insert the mains plug into the mains outlet socket. Avoid trapping
the mains cable between the appliance and the housing and ensure it is routed away from hot surfaces.
Place the oven into the housing unit and adjust its position until it is level, making sure it aligns with any
adjacent units, drawers, and cupboard doors (Figure 5).
When correctly positioned, drll the unit and secure the appliance in place with two fixing screws (Figure 6).
Figure 5 - centralising appliance
SCREWS
Figure 6 - installing the oven
