Page 7
Using the dishwasher
Setting and starting a wash cycle
Fill the recess in the door with detergent (between
5 and 20 grams) with the scoop supplied. The
amount of detergent depends upon the number of
soiled dishes loaded. A tablet may also be used.
Check to see if any rinse aid needs adding.
Close the door so it latches.
Turn on the electricity and water supply to the
dishwasher.
Push the POWER button to ON. The POWER
INDICATOR will light.
The dishwasher defaults to Norm wash programme
on switch on.
If you wish to select another wash programmme
press the PROG button. Each time it is pressed,
one of the programme indicators will light to show
which programme has been selected.
To help you choose the correct programme see the
Wash Cycle Table on page 8.
Press the PAUSE/RESUME button to start the
washing programme. While the programme is
running the programme indicator will flash. At the
end of the wash cycle the dishwasher will bleep
and the indicator light will stop flashing but stay
illuminated. After 10 minutes of inactivity the
indicator light will go out but the POWER
INDICATOR light will remain lit until the POWER
BUTTON is pressed to OFF.
If you wish to change the programme during
operation, press the PAUSE/RESUME button then
the PROG to the desired programme. Press the
PAUSE/RESUME key to start.
After the wash cycle has completed allow at least
15 minutes for the dishes to cool before handling. If
the dishwasher door is opened the dishes will cool
quicker.
After unloading the dishes clean the filter
(Figure 7).
ON/OFF
BUTTON
POWER
INDICATOR
PROGRAMME INDICATORS
TIME DELAY INDICATORS
FIGURE 6
Notes: The dishwasher is designed to stop if the
door is opened during operation. The door can be
allowed to open if the PAUSE/RESUME button is
pressed.
The dishwasher starts in ‘drain’ cycle as the
dishwasher retains some water in the sump to
prime the pump. It is normal for a quantity of
water to be expelled from the drain hose on
start-up.
Time Delay
The start of the dishwasher can be delayed up to 8
hours. To take advantage of this feature the
machine needs to be loaded and filled with
detergent and rinse aid.
Select the programme you wish to use.
Press the DELAY button until the period of delay is
shown by the indicator light.
Press the PAUSE/RESUME button. The machine
will start at the delayed time.
The indicator light showing the period of delay will
flash when the dishwasher is in the delay
programme.
