Page 12
Filter assembly
For best performance and results, the filter
assembly must be frequently cleaned.
The filter efficiently removes food residue from the
wash water, allowing it to be re-circulated during the
cycle. For this reason, it is a good idea to remove
the larger food particles trapped in the filter after
each wash cycle by rinsing the semicircular filter
and cup under running water. To remove the filter
assembly, pull on the cup handle in an upward
direction. The entire filter assembly (made up of the
"semicircular filter and the fine filter) should be
cleaned at least once a week.
To clean the semicircular filter and the fine filter, use
a cleaning brush. Then, reassemble the filter parts
as shown in the Figure 22. Re-insert the entire
assembly in the dishwasher, positioning in its seat
and pressing downwards.
Never use the appliance without the filters. Improper
placement of the filters may damage the dishes and
utensils etc.
Cleaning the spray arms
It may happen that food particles become encrusted
on the spray arms and block the holes. Check the
spray arms periodically and clean them when
needed.
Cleaning the water inlet filter
If fitted, periodically clean the small water inlet filter
located in the supply hose connector.
After turning off the water tap, unscrew the end of
the water supply hose, remove the filter and clean it
carefully under running water. Replace the filter and
tighten the water supply hose back into position.
How to keep your dishwasher in shape
Cleaning and special maintenance
After every wash
After every wash, it is advisable to turn off the water
supply to the appliance and leave the door slightly
ajar so that moisture and odours are not trapped
inside.
Remove the electric plug
Before cleaning or performing any maintenance
work on the appliance, always remove the electric
plug from the mains outlet socket. Do not run risks.
No solvents or abrasive cleaning
products
To clean the exterior and rubber parts of the
dishwasher, do not use solvents or abrasive
cleaning products. Only use a clean cloth and soapy
water.
To remove spots or stains from the surface of the
interior, use a cloth dampened with water and a little
white vinegar, or a cleaning product made
specifically for dishwashers.
When you go on holiday
When you go on holiday, it is recommended that
you run a wash cycle with the dishwasher empty
and then remove the plug from the socket, turn off
the water supply and leave the door of the
appliance slightly ajar. This will help the seals last
longer and prevent odours from forming within the
appliance.
Moving the appliance
If the appliance must be moved, try to keep it in a
vertical position. If absolutely necessary, it can be
laid on its back.
Seals
One of the factors that can cause odours to form in
the dishwasher is food that remains trapped in the
seals. Periodic cleaning with a damp sponge will
help prevent this from occurring.
FIGURE 22
SEMICIRCULAR
FILTER
FINE
FILTER
