![background image](http://html1.mh-extra.com/html/coolworks/mwdck-05cmn1-bi7/mwdck-05cmn1-bi7_instruction-manual_2661387009.webp)
Lower sash must open sufficiently to allow a clear vertical
opening of 13 inches (330mm). Side louvers and the rear
of the AC must have clear air space to allow enough airflow
through the condenser, for heat removal. The rear of the unit
must be outdoors, not inside a building or garage.
NOTE:
Save
Carton
and these
Installation Instructions
for future reference. The carton is the best way to store unit
during winter, or when not in use.
TOOLS NEEDED:
Phillips
Drill (If pilot holes are needed)
CAUTION:
When handling unit, be careful to avoid cuts from
sharp metal edges and aluminum fins on front and rear coils.
C: Align the hole in the top rail with those in the
top of the unit as shown in Fig.
Fig.C
Fig.D
D: Secure the top rail to the unit with 3/8
screws as shown in Fig.
NOTE:
For safety reasons, all four(4) screws
MUST
be securely fastened.
,,
7
in standard
double hung windows with opening widths of 23 to 36 inches
(584mm to 914mm) (See Fig.A).
Your air conditioner is designed to be installed
Before installing unit, the top rail must be assembled
on the unit.
Tool Needed:
Phillips Screwdriver
A: Remove the air conditioner from the carton and place
on a flat surface.
B: Remove top rail from the side of the packaging material
as shown in Fig.B
C
D.
Mounting Hardware
Fig. A
INNER
INTERIOR
WALL
Wooden Windows
WINDOW SILL
Top Rail Hardware
3 8 Screws
(4)
Top Rail
(1)
or
3/4 (or 1/ )
Screws
(7)
2
Lock Frame
(2)
Sash Lock
(1)
Window sash
seal foam
(1)
Packaging
Fig. B
Top Rail
Installation Instructions