With multiple Solar Heaters
Under the main base, there are two holes for hose connector assembly; one is located in the
center and another one is on the side. Water flows in the heater coils from the center hose
connector and then out through the side hose connector back to the pool. Longer hose is
provided for the connection of the heater to the pump/filter, and short hose is provided for
connection of additional heater as shown. If the length of hoses provided does not fit your
pools, you can use another soft hose with same diameter.
Hose Connectors on the Main Base
Two hose connectors are preinstalled on the bottom of the main base. Center hose
connector is for hose connection to the pump/filter. Side hose connector is for hose
connection to the pool return or additional CoolSplash solar Heater.
Before connecting to the hose, turn the side hose connector anticlockwise as shown until
it stops. The openings of 2 hose connectors should point in opposite directions.
25
Summary of Contents for Solar Heater
Page 31: ...Trouble Shooting 31...
Page 32: ...Exploded Drawing 32...