Super 80 Professional – AOM
ANTI-ICE AND RAIN PROTECTION
Section 7 Page 3
Super 80 Professional – Aircraft Operating Manual
Coolsky, 2018
CONTROLS AND INDICATORS
1. HEATER CUR METER
Displays current flow to each position as
selected by the METER SEL & HEAT switch.
2. METER SEL & HEAT SELECTOR
When the selector is moved from the OFF
position, all pitot tubes, rudder limiter, stall
probes and static ports are heated.
3. AIR FOIL ANTI-ICE SWITCH
OFF
Stops the flow of heated air to the
wing leading edge slats, strakes, and
horizontal stabilizer.
ON
Opens up the pressure regulator
valve to allow heated air to flow to
the wing leading edge slats, strakes,
and horizontal stabilizer.
4. TAIL DE-ICE PUSHBUTTON
Closes shutoff valve to the wings and strakes,
and opens up the shutoff valve to de-ice the
tail. After a timed period, 2.5 minutes, the
system automatically reverts back to anti-
icing the wings and strakes.
5. WINDSHIELD ANTI-FOG SWITCH
OFF
Deactivates the anti-fog system.
ON
Prevents and/or removes
condensation on the inside surface
of the windshields, clearview, and
overhead windows.
6. WINDSHIELD ANTI-ICE SWITCH
OFF
Deactivates the window anti-ice
system.
ON
Provides anti-ice heat to three
windshields.
7. ENG ANTI-ICE SWITCHES (L, R)
OFF
Closes valves to shut off air to engine
anti-ice system.
ON
Opens valves to provide heater air to
anti-ice engine nose cowl, bullet,
and inlet compressor guide vanes.
