Troubleshooting:
1) Power:
Make sure you have power from the vehicle power source to the remote controller.
Make the switch is in the “ON” position. Make sure the Deutsch connector at the main
cooling system is secure.
2) Leaks:
Check to see if all fittings are properly connected. Listen for an audible “click” as
you engage the quick connects.
3) Not Pumping:
Make sure the water tank is full. Make sure that the float in the water tank is in the
“UP” position. Make sure the hose of the COOLSHIRT is not “kinked.” Check the hoses
to be sure that your seat belt or harness is not crimping the tubing.
4) Not Cooling:
Repeat all the steps of “NOT PUMPING” above. Make sure the toggle switch of the
remote controller is either in the 50% or 100% position. Make sure that the air vents on
the side plates and vented end of the cooling unit is not obstructed.
Maintenance:
1). MAIN COOLING UNIT OF ProCool-R:
Keep the device clean and dry. Make sure that the vent holes are clean and
unobstructed.
2). COOLSHIRT®:
Turn the shirt inside out and wash in washing machine on the gentle cycle in warm or
cold water.
PROCOOL R
© 2014 COOLSHIRT SYSTEMS, 170 Andrew Drive, Stockbridge GA 30281
Office : 800-345-3176 Fax: 678-289-4325
www.coolshirt.com
