1. Function Description
This power supply is designed for personal computer. There are six DC outputs:
+5V, +12V1, +12V2, -12V, +3.3V,+5V , and it provides power to all computer
SB
systems and peripherals with maximum protection.
Here are some of the key features:
It is rather simple to install this power supply to your precious computer
tower. Follow the steps below to finish the setup.
Step1:Open the computer tower cover; put the power supply into the
corresponding location of the tower, and then use right screws to fix the
power supply to tower.
Step2:Put the Main Power Connector, ATX12V Connector, Peripheral
Connectors, Floppy Connectors, PCI-Express Conntector and many
others(when available) to the corresponding male sockets such as main-
board, peripheral devices (i.e. HDD, CDROM etc.) and floppy drivers
respectively. When you connect connectors, please pay attention to the
orientation of them because of the different hole sizes. Find the proper
orientation and push down firmly making sure that the pins are aligned.
2. How to Setup
1
Alumtnum chassis
12cm fan design, long life, noiseless and fastest cooling time
All kinds of protection circuits (OVP/OPP/OCP/SCP)
High efficiency: not less than 75% at full load
Externally selectable 3-band TMS(Thermal Management System:
Low/AUTO/High) to meet vast majority end users demands
S-ATA connector ready
Qualified with Intel standards
S-ATA connector ready
SLI ready
