1. Function Description
This power supply is designed for personal computer. There are six DC outputs:
+5V, +12V1, +12V2, -12V, +3.3V
+5V
, and it provides power to all
computer systems and peripherals with maximum protection.
＆
SB
Here are some of the key features:
It is rather simple to install this power supply to your precious computer
tower. Follow the steps below to finish the setup.
Step1:Open the computer tower cover; put the power supply into the
corresponding location of the tower, and then use right screws to fix the
power supply to tower.
Step2:Plug firmly the Main Power Connector, ATX12V 4P Connectors,S-ATA
Connector, Peripheral Connectors and Floppy Connectors to the
corresponding male connectors of main-board, peripheral devices (i.e.
HDD, CDROM etc.) And floppy drivers respectively. When you connect
the connectors, please pay attention to the orientation of them because of
the different hole sizes. Find the proper orientation and push down firmly
and be sure that the pins are aligned.
2. How to Setup
1
Reflected chassis
Active Power Factor Correction
Externally selectable 3-band TMS(Thermal Management
System: Auto/Low/High) to meet vast majority end users' demands
24-20Pin/4-8Pin connectors available to support both 20Pin and
24Pin socket motherboards
Tube-tide design to tidy the wires
All kinds of protection circuits (OVP/OCP/OPP/SCP)
High efficiency: not less than 75% at full load
