USBG-8COM-M – Product Manual
5
www.coolgear.com
1.2
Adapter Diagram
Figure 1
1.3
Plugging in the Adapter
1)
Connect the AC/DC Adapter if your USB bus power is not enough to drive the
whole unit.
2)
Plug the Type-A end of the USB cable into the USB Host Port of your PC or into
an available USB port on a USB Hub.
3)
Plug the Type-B end of the USB cable into the back of this unit.
4)
Proceed with the next section “Installing Drivers” to install the virtual COM port
drivers for your Operating System.
