[email protected] www.CoolGear.com
Check Installation
You can now verify the installation has been completed successfully by looking under Device Manager of the System
Properties screen. (Go there by Start-Setting- Control Panel-System Properties-Hardware-Device Manager.
The device should have installed as a "USB Serial Port (COMx)" attached to "USB Serial Converter (A/B or A/B/C/D)".
Change COM Port Properties & COM Port Number
This feature is particularly useful for programs, such as HyperTerminal, which only work with COM1 through COM4.
Please ensure that you do not change the COM Port Number already in use.
To change the virtual COM port properties:
•
Select the "USB Serial Port"
•
Click “Properties”.
•
Select "Port Setting" and “Advanced”.
•
Click the drop down arrow on COM Port Number and scroll to the required COM port. Select "OK".
•
Return to the Device Manager Screen. You will see that the USB Serial Port installation has been changed to the
new COM Port Number.
Uninstalling Windows 2003/XP/2000 Drivers
Please proceed with the following steps to uninstall the 2003/XP/2000 driver:
1.
Insert the “USB COM Series Driver and Utility” CD into your CD-ROM.
2.
The “USB COM Series Driver and Utility CD” dialog box appears.
3.
Under “Driver uninstalling”, double click “Windows 2003, XP, 2000 driver uninstall” to uninstall the device
driver.
4.
When following dialog box appears, double click “Clean System” to uninstall the 2003/XP/2000 drivers.
