[email protected] http://www.coolgear.com
DVI
3.
Locate an unused PCI Express slot (typically white and smaller) and remove the corresponding slot cover from
computer chassis.
4.
Plug the PCIe add-in card to the unused PCI Express expansion slot and attached its card bracket to the computer
chassis screw.
5.
Put the chassis cover back on the computer.
6.
Install one end of the Expansion Cable to PCIe add-in card’s connector and the other end to the Expansion Box’s.
Waring!!
Since the Expansion Cable’s connector has the same form factor as the standard DVI
connector, however, their signals are different; please do NOT connect the Expansion Cable to neither
your LCD monitor nor your Video Graphic cards.
7.
Then we are installing the PCI add-in cards in the Expansion Box:
Open the top cover (by removing the screws) of
the Expansion Box, there are 4 PCI slots in the Expansion Box.
Find an unused slot, remove the “blank” PCI card
bracket that was pre-installed from the factory.
Plug in your PCI add-in card (s).
Put the top cover back on your
Expansion Box.
8.
Connect the AC power Adapter’s cable to the Expansion Box.
9.
Turn on the Expansion Box power by means of its power switch next to the Expansion Cable, then power on the PC
system.
10.
Proceed with Software Driver Installation if required.
Installing PCI Add-in cards
inside the Expansion Box
