5
ENGLISH
on the remote control (19); the indicators «
» on the
display (18) inform about the selected airflow speed.
There are 3 airflow speed settings:
I corresponds to the low speed (L),
II corresponds to the medium speed (M),
III corresponds to the high speed (H).
•
Switch the oscillation mode on by pressing the «OSC»
button (17) on the control panel (1) or the button (17) on
the remote control (19); to switch the oscillation mode
off, press the button (17) again.
•
Set the automatic switch-off timer by pressing the but-
ton (14) «Timer» on the control panel (1) or the button
(14) on the remote control (19); the corresponding light
indicators on the display (18) will inform about the set
time. You can set the fan operation time between 1 and
7.5 hours with a 0.5 setting step. To switch the timer
off, press the button (14) repeatedly until all the timer
indicators on the display (18) go out.
•
Switch between airflow modes by pressing the «Mode»
button (13).
There are 3 airflow modes:
I – «Natural», the airflow speed will be gradually increas-
ing and gradually decreasing, the «
» symbol will
appear on the display (18);
II – «Sleep», the night mode, the «
» symbol will
appear on the display (18);
III – «Normal», the regular fan operation mode, neither
symbol will appear on the display (18).
•
To switch the selected airflow mode on, press the
«Mode» button (13) repeatedly, until the appropriate
symbol appears on the display.
•
To switch the selected airflow mode off, press the button
(13) until both symbols go out.
Using the remote control (19):
•
Remove the battery compartment lid of the remote
control (19) and insert a «CR2025» type battery, strict-
ly following the polarity. Close the battery compart-
ment lid.
•
If you do not use the unit for a long time, remove the
batteries from the battery compartment of the remote
control (19).
Note:
– Replace the batteries in the remote control (19) in time,
to avoid damage of the remote control (19), prevent
leaking of batteries.
Attention!
Functions of the buttons on the remote control (19) fully
correspond to the buttons on the control panel (1).
•
You can place the remote control (19) on the rear side of
the fan body (12).
MAINTENANCE AND CARE
•
Before cleaning the fan switch it off and remove the plug
of the power cord from the socket.
•
Wipe the fan body (12) with a soft, slightly damp cloth
and then wipe it dry.
•
Do not use solvents or abrasives for cleaning the unit
body (12).
•
Do not immerse the fan body (12), the power cord (5)
and the plug into water or any other liquids; provide that
water does not get into the fan body (12) to avoid electric
shock or damaging the unit.
•
To clean the air inlets (3) on the rear side of the fan
you can use a vacuum cleaner with a corresponding
attachment.
•
Make sure that the power cord (5) does not touch sharp
objects or furniture edges.
•
Before taking the fan for long storage clean it, disassem-
ble the base (4), remove the batteries from the battery
compartment of the remote control (19), place the fan
into its packaging, and put it into a dry cool place away
from children for storage.
•
Before switching the fan on next time assemble it,
check its workability and integrity of the power cord
isolation.
STORAGE
– Unplug the fan and clean it.
– Pack the fan into the original package and put it away for
storage in a dry cool place away from children.
– Keep the unit in a dry cool place away from children and
disabled persons.
DELIVERY SET
Fan body – 1 pc.
Base – 1 pc. (consists of two pieces)
Remote control – 1 pc.
Instruction manual – 1 pc.
Warranty certificate – 1 pc.
TECHNICAL SPECIFICATIONS
Fan
Power supply: 220-240 V ~ 50 Hz
Rated input power: 45 W
Remote control
Power supply: 3 V, «СR2025» battery (included)
RECYCLING
For environment protection do not throw out the unit and
the batteries (if included), do not discard the unit and the
batteries with usual household waste after the service
life expiration; apply to specialized centers for further
recycling.
The waste generated during the disposal of the unit is
subject to mandatory collection and consequent disposal
in the prescribed manner.
For further information about recycling of this product
apply to a local municipal administration, a disposal service
or to the shop where you purchased this product.
The manufacturer preserves the right to change design,
structure and specifications not affecting general princi-
ples of the unit operation without a preliminary notification
due to which insignificant differences between the manual
and product may be observed. If the user reveals such dif-
ferences, please report them via e-mail [email protected]
for receipt of an updated manual.
Unit operating life is not less than 3 years
Guarantee
Details regarding guarantee conditions can be obtained
from the dealer from whom the appliance was purchased.
The bill of sale or receipt must be produced when making
any claim under the terms of this guarantee.
This product conforms to the EMC Directive
2014/30/EU and to the Low Voltage Directive
2014/35/EU.
