IPCAM User Manual
24
·
You need to set
port mapping function successfully
, to check whether the router UPNP function is
available, if It was unavailable, please make it available refer to the routers user manual!
If you use TPLINK router, please refer to these instructions
·
Through the upnp automatic mapping port to the network: input router IP address in the browser (such
as "http://192.168.1.1/ >, the router IP addresses are written on paper label on the router house---- please set
according to your own IP address), open the routers page" forward rules "> >" upnp set ", to ensure that the
current state of upnp is "already available," as below:
Note: some of the router interface without "UPNP Settings" option, the n need to open the virtual server IP
cameras in the local area network of mapping the connection IP address and port number
Picture 36
6
Access IP camera via mobile equipment
such as mobile phone,Ipad Etcs.
There are two kinds of ways to access IP camera: One is to input IP address in browser directly, It can be IP
address and also can be DDNS. Another is to use clients to visit.
！
6.1 Input IP address in browser
1
●
We take IPAD as example as blows：
