coolaroo.com
Connect fixing accessories to mounting points as required.
Ensure all connections face towards the middle of the sail and
are tightly secured.
Check again to ensure all mounting points are solid.
Lay your sail out to commence installation.
It is important to note that your sail will require at least two of the
accessories to be tensioning devices. If required, stainless steel chain
can be used to extend your shade sail corner to a fixing point.
Connect the shade sail to the fixing accessories, leaving one of the
tensioning fixing points to last for connection. If necessary, to gain
increased leverage use a Coolaroo strap tensioner.
all weather connection
If installing your shade post into soft ground firstly pour a 100mm (4”)
depth of concrete into the hole and allow to set completely. Add a
gravel bed, 100mm (4”) in depth. Position the post at a 5 degree angle,
sloping away from the centre of the sails position and add the required
amount of concrete.
Temporarily brace the posts until concrete is fully cured.
Soft ground
20mm dia.
gravel bed
Concrete
pad
Soft ground
Concrete
footing
5
°
100mm
100mm
