CL-PAC-121_122
5
12
PRODUCT DIAGRAM
Control Panel
5
Carry Handle
Air Outlet &
Louvers
Power Cord
Upper Air Intake
Lower Air Intake
Air Exhaust Vent
Filter
Location
LIGHT
12
REMOTE CONTROL OPERATING INSTRUCTIONS
In Cooling or Dehumidifier (DRY) modes: When sleep
mode is selected the set temperature will automatically
increase 2
°
F after 1 hour. After 2 hours, the set tempera-
ture will increase another 2
°
F for a total increase of 4
°
F.
Press the LIGHT button to turn the on the display Light.
A small Light bulb icon will light up on the remote con-
trol display.
Press the SLEEP mode button to engage SLEEP
mode.. This feature limits compressor usage and
enhances energy savings by adjusting the set
temperature while you are sleeping. Press the SLEEP
button once more to disable Sleep Mode. Sleep Mode
is not available in Auto or Fan Modes.
Press the X-FAN button to enable the X-Fan function.
When enable, X-Fan will force the fan to remain on once
the unit is powered down. The fan stays on to dry out any
remaining moisture in the unit to help minimize mold or
bacteria growth. X-Fan cannot be set under Auto, Fan, or
Heat (CL-PAC-122 only) modes.
In Heating mode (CL-PAC-122 only): When sleep
mode is selected the set temperature will automatically
decrease 2
°
F after 1 hour. After 2 hours, the set tem-
perature will decrease another 2
°
F for a total increase of
4
°
F.
REMOTE CONTROL
SLEEP
SLEEP BUTTON
LIGHT BUTTON
X-FAN
X-FAN BUTTON
LOCK
LOCK FUNCTION
x
Press “+” and “-” buttons together at the same time to
lock the remote keyboard. Do this again to unlock.
AUTO
AUTO MODE
x
Press the MODE button to select Auto Mode. Once
Auto Mode is selected the unit will automatically
choose the operating mode based on the current room
temperature. The temperature will not be displayed on
the LED in this mode.
TEMP
MEASURE
CHANGE BETWEEN F° and C°
x
When the unit is off, press the MODE and “-” button
to change between F° and C°.
REMOTE CONTROL OPERATING INSTRUCTIONS
Press the X-FAN button to enable the X-Fan function.
When enable, X-Fan will force the fan to remain on
once the unit is powered down. The fan stays on to dry
out any remaining moisture in the unit to help minimize
mold or bacteria growth. X-Fan cannot be set under
Auto, Fan, or Heat (CL-PAC-122 only) modes.
When the unit is off, press the MODE and “-” button
to change between F° and C°.
Press the SLEEP mode button to engage SLEEP
mode.. This feature limits compressor usage and en-
hances energy savings by adjusting the set temperature
while you are sleeping. Press the SLEEP button once
more to disable Sleep Mode. Sleep Mode is not avail-
able in Auto or Fan Modes.
In Cooling or Dehumidifier (DRY) modes: When
sleep mode is selected the set temperature will auto-
matically increase 2°F after 1 hour. After 2 hours, the
set temperature will increase another 2°F for a total
increase of 4°F.
In Heating mode (CL-PAC-122 only): When sleep
mode is selected the set temperature will automati-
cally decrease 2°F after 1 hour. After 2 hours, the set
temperature will decrease another 2°F for a total in-
crease of 4°F.