- 13 -
increase the temperature, “▼” to decrease the temperature.
NOTE: Press “▲” and “▼” at the same time to lock the
parameters, press “▲” and “▼” again to unlock.
5.4
“CLOCK” button
This button is for Time setting and Parameter setting.
5.5
“TIMER” button
This button is for Timer ON and Timer OFF setting.
5.6
“ELEC. HEATING” button mode selection
Press and hold “ELEC.HEATING” button for 10 seconds, you
can choose the mode. ( Economic mode [display
and
],
Auto mode [display
and
], Rapid heating mode,
[display
and
].
Press and hold “ELEC.HEATING” button for 5 seconds, it will
go to check the temperature and actual step motor of electronic
expansion valve.
A. Evaporator coil temperature
B. Ambient temperature
C. Exhaust temperature
D. Gas return temperature
