COOL BOSS CB-16H, Installation And Operation Manual, Page: 5 / 40

Cool Boss Evaporative Air Cooler
5
P/N 5900271 — June 2022 — Rev. A4
• Do not make any modifications to the product. This voids the warranty and increases the chances
of injury or property damage.
• Avoid using an extension cord; they can overheat. If you must use an extension cord, make sure it
is a three conductor No. 14 AWG minimum with a three prong plug/receptacle and does not
exceed 50-feet in length. For 100-foot extensions cords use 12 AWG minimum.
• Do not spray the outside of the unit with water. Moisture can harm the motor and other parts of the
electrical system.
• Only connect the power cord to a grounded, three-prong GFCI protected receptacle.
• Lock at least two Casters before turning on the fan.
• Make a visual inspection of the product before using it. Check for damaged or missing parts. Do
not use the product if you find problems with the unit
. Instead, remove it from service,
then contact your dealer, call Cool Boss at (805) 933-9970 , or email Cool Boss at
support@coolboss.com
.
• Do
not
operate the Cool Boss if the fan has cracked or damaged blades.
• Do
not
operate the Cool Boss unless the Media is securely in place.
• Do
not
operate the Cool Boss within 35-feet (10.6 m) of an open flame or spark.
• Do not operate the Cool Boss if the GFCI does not remove power when the Test button is
pressed.
•
Always
remove the plug from the electrical receptacle by pulling on the plug not the power cord.
• CoolBoss recommends making a thorough inspection of the product at least once a year. Replace
any damaged or severely worn parts, decals, or warning labels.
Save these instructions!
Symbols
Following are the symbols used in this manual:
⚠
DANGER
Calls attention to an immediate hazard that will result in death or severe injury.
⚠
WARNING
Calls attention to a hazard or unsafe practice that could result in death or severe
personal injury.
⚠
CAUTION Calls attention to a hazard or unsafe practice that could result in minor personal
injury, product, or property damage.
Tip Calls attention to information that can help you use your product better.
Liability Information
BendPak Inc. Cool Boss assumes
no
liability for damages resulting from:
• Use of the equipment for purposes other than those described in this manual.
• Modifications to the equipment without prior, written permission from BendPak Inc., Cool Boss
•
Injury or death caused by modifying, disabling, overriding, or removing safety features.
• Damage to the equipment from external influences.
• Incorrect operation of the equipment.