Timer Functions
ThermoPad Operation Instructions
9
www.coolautomation.com
© 2008 Cool Automation
3. The operation status (On/Off) is selected by pressing the button (8). When the timer programmed
to turn the unit "On", the operation mode appears on the screen.
When the timer is programmed to turn the unit "Off", the operation mode disappears, as shown in
the pictures below.
4. The "time period" is selected by pressing first on the time area (1), and then navigation arrows
(11).
a. When pressing on the "hours" area, it starts blinking. At this time the "hours" of the time period
are selected.
b. When pressing on the "minutes" area, the minutes start blinking. At this time the "minutes" of the
"time period" can be selected.
5. After selecting the parameters, the timer can be activated or deactivated by pressing on (12).
When the timer is activated, the "ON" sign will appear on the screen
(11). When timer is deactivated, "OFF" sign will appear on the screen (11). Each press on the area
(11) changes the activation status.
6. Pushing the "Cancel" button (10) will save and exit the timer programming.
7. Pressing on the "Timer Number" again will make it blink. At this point, using the navigation arrows
(11) another timer can be chosen for programming.
