6
CLEANING
Before cleaning ensure power is switched off at mains and
plug has been removed.
Wait until your toaster has cooled down completely before
cleaning.
Clean the outer surface with a soft damp cloth only.
It is important that crumbs are not allowed to build up inside
the base of the toaster. Crumbs can smoke and even burn.
Crumbs can be removed by simply sliding out the crumb tray
at the bottom of the toaster. You can then tip the crumbs out.
Do it regularly.
CONNECTION TO POWER
Before connecting, check that the voltage indicated on the
appliance (bottom of the appliance) corresponds with the
main voltage in your home. If this is not the case, consult your
dealer and do not use.
This appliance may be fitted with a non-rewirable plug. If you
need to change the fuse in a non-rewirable plug, the fuse
cover must be refitted. If the fuse cover is lost or damaged,
the plug must not be used until a replacement is obtained
(available from the appliance manufacturer).
If the plug has to be changed because it is not suitable for your
socket, or becomes damaged, it should be cut off and
appropriate plug fitted following the wiring instructions. The
plug removed must be disposed of safely as insertion into a
mains socket is likely to cause an electrical hazard.
