Issue 2 2/5/2019
4
TO USE THE KETTLE
This kettle can be used to heat water to a variety of temperatures,
ideal for the preparation of some fruit and speciality teas that are best
prepared at lower temperatures. The kettle can also keep water at the
selected temperature up to 30 minutes if desired.
1.
Place the kettle and stand on a stable, flat, heat resistant surface
and away from surfaces that may be damaged by steam.
2.
Fully unwind the cable, plug in and switch on at the mains, a bleep
will be heard, and the indicators will briefly illuminate. For safety
do not allow the cable to dangle over the edge of units.
3.
Remove the kettle from the stand; press the lid button to open the
lid. Fill to the required level using the graduated markings on the
glass body as a guide. Do not fill past the maximum (1.7 litre / 7
cups) or below the minimum (0.5 litre / 2 cups) level.
4.
Close the lid fully (it clicks as it closes), replace the kettle on the
stand and turn the kettle so that the spout faces away from you.
To boil the kettle, press the ON / OFF ( ) button. The
indicators in the on/off and 100˚C buttons will illuminate.
To heat water to 90, 80 or 70˚C, press the on /off button and
then press the temperature button of choice. The indicators
in the ON/OFF ( ) and temperature button of choice will
illuminate.
To keep the water at the selected temperature, follow
direction above and then press the KEEP WARM button before
the kettle reaches the desired temperature. The indicator in
the button will flash to show that this mode has been selected.
5.
Unless the ‘keep warm’ function has been selected, the kettle will
bleep and switch off automatically when the water reaches the
desired temperature and the indicator lights will go off.
6.
If the ‘keep warm’ function has been selected. The kettle will
reactivate periodically to maintain the desired temperature for up
to 30 minutes. During this interval the kettle can be removed from
the stand (max 3 min) and replaced and the setting will be
retained. The on/off, temperature and keep warm indicators will
remain lit to show that the kettle is in keep warm mode.
7.
To stop or interrupt the heating process, switch the appliance off
by pressing the ON/OFF ( ) button or removing the kettle from
the stand.
Summary of Contents for KE8040T-GS
Page 8: ...Issue 2 2 5 2019 8...
