Issue 1 30/4/2019
5
TO USE
1.
Clean thoroughly before first use.
2.
Place the ingredients to be mixed into a suitable container
and place the container on a stable surface.
3.
Fully unwind the hand mixer cable and check that the
speed control slider is in the off (0) position.
4.
Fit the beaters into the motor housing and plug in.
5.
Place the mixing heads into the ingredients to be blended.
Do not immerse beyond the top of the mixing heads.
6.
Switch on and using the speed slider, select the mixer
speed of choice. Speed 1 is the slowest setting and speed
5 the fastest.
7.
If the TURBO (pulse) button is held down whilst the mixer
is in operation the highest speed setting will be
immediately selected. When the button is released the
mixer will slow to the speed shown on the speed control
slider.
8.
To switch off, move the speed control slider to the off (0)
position and allow the mixing heads to come to a complete
stop before checking the consistency of the mix. If
satisfactory, remove the mixer.
9.
Mix for a maximum of 5 minutes. If further mixing is
required, wait at least 20 minutes before restarting the
mixer.
10.
To stop or interrupt the mixing process, move the speed
slider to the off (0) position or turn off at the mains.
Notes:
Do not run the mixer dry (without the mixing heads in the
ingredients).
Use refrigerated ingredients (e.g. butter and margarine) at
room temperature.
Summary of Contents for HM9018B-GS
Page 9: ...Issue 1 30 4 2019 9...
