ISSUE-1 26/10/2017
4
Fitting the mixing accessories
1.
To fit the beaters insert the beaters into the sockets on the
underside of the motor housing
(figs 1 & 2
) and push firmly.
2.
To fit the dough hooks insert the dough hook with the washer into
the larger socket (see below) on the underside of the motor
housing (fig. 3) and push firmly.
Fig. 1
Fig. 2
Fig.3
3.
To eject the mixing accessories, hold the mixing heads with one
hand and press the eject button firmly with the other.
Using the stand
1.
Position the stand on a flat surface with the mixer support in the
horizontal position. To raise or lower the mixer support, press the
release button.
2.
Fit the bowl onto the stand
.
3.
Fit the mixing attachments into the underside of the mixer and then
fit the motor housing into the mixer support as shown
(
figs.4 & 5).
A click will be heard when the housing is locked into position.
4.
To remove the mixer from the support after use, press the release
lever and lift off.
Fit dough hook with washer into this hole
Fig. 5
Fig. 4
Summary of Contents for HM729WB
Page 8: ...ISSUE 1 26 10 2017 8...
