Cookworks HB956SH6PB, Care & Instruction Manual, Page: 7 / 11

ISSUE-1 24/7/2017 7
Using the whisk
1.
Fit the whisk head into the gear box and then fit
the assembly onto the motor housing and lock
into position (fig.3).
2. Place the ingredients to be whisked into the
beaker or a high sided bowl and place the bowl
on a stable surface. Do not overfill the beaker
(max 1100ml).
3. Place the head of the whisk partially below the
surface of the ingredients. Do not immerse the
head beyond the max level shown in the
diagram opposite.
4. Connect to the mains, select the operation
speed of choice and when using the whisk, mix
for a maximum of 3 minutes. If further whisking
is required, wait 1 minute before restarting.
5. After a total of 3 of the above cycles, the whisk
should be rested for 20 minutes.
6. Whisk to the desired consistency – see step 6
onwards under ‘basic operation’.
Note

To avoid splashing, ensure head of the whisk is within the
whisking bowl before starting or removing.

Do not add extra ingredients into the beaker / blending container
when the whisk is operating.
Max
Max
insertion
level
Fig. 3