Cookworks HAND MIXER, Instruction Manual, Page: 5 / 7

4
1. Unplug the appliance from wall outlet before cleaning.
2. Wipe over the outside surface with a damped cloth and polish with a soft dry
cloth.
3. Wash the beaters in warm soapy water and wipe dry. The beaters may be
placed in the dishwasher for easier cleaning.
Caution: Never immerse the hand mixer or power cord into water for cleaning.
CONNECTION TO POWER
ƒ
Before connecting, check that the voltage indicated on the appliance (bottom
of the appliance) corresponds with the main voltage in your home. If this is not
the case, consult your dealer and do not use.
ƒ This appliance may be fitted with a non-rewirable plug. If you need to change
the fuse in a non-rewirable plug, the fuse cover must be refitted. If the fuse
cover is lost or damaged, the plug must not be used until a replacement is
obtained (available from the appliance manufacturer).
ƒ
If the plug has to be changed because it is not suitable for your socket, or
becomes damaged, it should be cut off and appropriate plug fitted following
the wiring instructions. The plug removed must be disposed of safely as
insertion into a mains socket is likely to cause an electrical hazard.
ƒ
This equipment must be disconnected from the mains when not in use. Do not
allow this unit to be exposed to rain or moisture.
For your own safety read the following instructions carefully before
attempting to connect this unit to the mains.
You should only plug the appliance into a 230V AC, 50Hz supply. Connecting
it to other power sources may damage the appliance.
CLEANING